Matata Outdoor Shop

Omius VISOR W/ 20 COOLING PIECES

顏色

數量

簡介

+ VISOR W/ 20 COOLING PIECES Visor comes bundled with a 20-pack of cooling pieces. Ergonomic design Adjustable for different head sizes Replaceable cooling pieces Available in Black and White Weight 93g (3.3oz) Omius 美國科技降溫頭帶 -透過頭帶上石墨冷卻粒散熱 -增加5倍散熱表面積 -透過氣流產生的蒸發作用散熱 -降低核心溫度提高表現 -多位世界頂級奧運選手使用 原理： 是透過氣流經過頭帶上濕潤的冷卻粒，產生的蒸發過程帶走廢熱達致降溫效果 用法 1. 佩戴頭帶散熱粒直接接觸皮膚 2. ⁠讓散熱粒濕潤，跑步時氣流經過散熱粒產生蒸發降溫 3. ⁠散熱粒可透過汗水或者20-30分鐘淋濕保持濕潤達到最佳嘅效果 Omius香港區代理： Matata Company Omius頭帶、遮陽帽和帽子的獨特設計配備矽膠網格，可固定Omius冷卻片。網格將冷卻片固定在原位並直接接觸皮膚。冷卻片可更換，並可輕鬆從一種形式轉換為另一種形式。產品採用最高品質的彈性材料製成，符合人體工程學，舒適貼合。頭帶和帽子的彈性材料適合大多數頭部尺寸。遮陽帽可調節。 當水或汗水在皮膚表面蒸發時，會吸收熱量並冷卻身體。 Omius技術的增強冷卻效果來自於水被吸收到冷卻片中，其中有5倍以上的蒸發表面積。水從液體變為氣體時，會從與皮膚接觸的冷卻片內部吸收熱量，從而冷卻皮膚。 由於冷卻效果僅由水蒸發驅動，只要冷卻片濕潤並有空氣流經，效果將持續下去。 冷卻片中的材料是什麼？ 冷卻片由高度導熱的石墨製成，外表塗有親水塗層，最大程度地優化了吸收和蒸發水分以發揮冷卻效果。 皮膚接觸 該技術使冷卻片外表面的水蒸發，然後從與皮膚接觸的平坦表面中抽取熱量。Omius產品設計為將冷卻片平放在額頭上，以確保最大熱量傳遞。請確保皮膚和冷卻片之間沒有頭髮。 不要覆蓋 為了獲得最大的冷卻效果，請確保有充分的空氣流通。重要的是永遠不要覆蓋冷卻片，因為這將降低空氣流通量。 保持濕潤 技術的冷卻功效來自於冷卻片中水的蒸發。因此，在使用時必須保持冷卻片濕潤。使用前浸泡材料，並在使用過程中定期添加水。僅靠汗水可能無法發揮最佳效果。必須有足夠的空氣流通，步行、跑步或騎自行車時自然會產生，當您靜止不動時，風扇可以提供所需的空氣流通。 清潔 定期清洗冷卻片上的鹽和其他雜質非常重要。輕輕手洗頭帶和僅清洗冷卻片背面，使用柔軟的肥皂（洗碗皂效果很好！）。浸泡在肥皂水中以清除所有表面的雜質。徹底沖洗以清除所有肥皂。 保固 您的Omius帽子、遮陽帽和頭帶享有一年的材料和工藝製造缺陷保固。如果在保固期內發生任何製造缺陷，Omius將更換或維修該產品為相同或當時的設計。 小心使用 冷卻片易碎，正常磨損可能會破裂或碎裂。保持Omius產品的最重要方法是始終小心處理冷卻片。請將您的頭戴裝置視為一副高級太陽眼鏡，不要刮損。不要將冷卻片撞擊在堅硬表面上，不使用時請存放在安全的地方。 注意：Omius冷卻片不提供破損或破碎的保固，因為它們在設計上易碎，偶爾可能會破損。 Omius American Technology Cooling Products - Heat dissipation through graphite cooling particles on the headband - Increases cooling surface area by 5 times - Heat dissipation through the evaporation process generated by airflow - Reduces core temperature to enhance performance - Utilized by multiple top-tier Olympic athletes worldwide Principle: Utilizes airflow passing through the moist cooling particles on the headband to achieve cooling effects by carrying away waste heat through the evaporation process. Instructions: 1. Wear the headband with the cooling particles directly in contact with the skin. 2. Keep the cooling particles moist. When running, airflow passing through the cooling particles generates evaporation for cooling. 3. The cooling particles can be kept moist through sweat or by wetting for 20-30 minutes to achieve optimal cooling effects. Omius Hong Kong Regional Distributor : Matata Company DESCRIPTION The Omius headband, visors and caps are uniquely designed with a silicon grid to hold the Omius cooling pieces. The grid holds the pieces in place and in direct contact with the skin. The cooling pieces are replaceable and easily transferable from one form factor to another. The products are made of the highest quality elastic material for an ergonomics and comfortable fit. The elastic material of the headband and cap and fit most head sizes. The visor is adjustable. When water or sweat evaporates on the surface of the skin it absorbs heat and cools the body. The amplified cooling effect of the Omius technology comes from water being absorbed into the cooling pieces where it has 5x more surface area for evaporation. The transformation of water from a liquid to a gas on the surface of the graphite pulls heat from the inside of the cooling pieces which are in contact with the skin and thus cooling the skin. Because the cooling effect is driven solely by water evaporation the effect will continue indefinitely as long as the cooling pieces are wet and have airflow across them. What is the material in the cooling pieces? The cooling pieces are made of a highly thermally conductive graphite coated in a hydrophilic coating that optimizes the uptake and evaporation of the water that powers the cooling effect. Skin Contact The technology evaporates water on the outer surfaces of the cooling pieces and then pulls the heat from the flat surface resting on the skin. Omius products are designed to keep the cooling pieces flat against the forehead to ensure maximum heat transfer. Be sure not to have hair between the skin and cooling pieces Don't Cover In order to get maximum performance from the cooling pieces you want to ensure maximum airflow. It is important that you never cover the cooling pieces as it will reduce airflow and Keep Wet The cooling power of the technology comes from the evaporation of the water in the cooling pieces. It is therefore critical that the cooling pieces are kept wet at all times while in use. Soak the material prior to usage and add water regularly throughout the session. Sweat alone will not be enough for maximum performance. risk damaging them. The required airflow comes naturally from walking, running or biking and when you are stationary, a fan can provide the airflow needed. Clean It is important to regularly wash salts and other impurities off the pieces. GENTLY hand wash the headband and BACKSIDE ONLY of the cooling pieces using soft soap (dishwashing soap works great!). Soak in soapy water to get impurities off all surfaces. Rinse thoroughly to get rid of all the soap. ~WARRANTY Your Omius hat, visor and headbands include a warranty against manufacturing defects in material and workmanship for a period of one year from the date of purchase. In the event of any such defect occurring during the warranty period, Omius will repair or replace the product with one of the same or then current design. Treat with Care The cooling pieces are fragile and can chip or break from normal wear and tear. The most important thing you can do to maintain your Omius product is to always handle the cooling pieces with great care. Think of your headgear as a premium pair of sunglasses that you don’t want to scratch. Do not hit the cooling pieces on hard surfaces and always store in a safe place when not in use. NOTE: The Omius cooling pieces DO NOT include a warranty against damage or breakage as they are by design fragile and may on occasion break.

你可能感興趣的商品